A quick, safe install from site prep to first delivery.
- Choose one of 10 body sites (rotate); clean with additive-free medical alcohol; air-dry.
- Stick the pump base; load cannula in inserter; place under base ridge; press to skin; press the two orange buttons to insert; press the white button to release the tool.
- Fill the reservoir slowly; remove bubbles; detach the outer ring and pull-rod.
- Insert a fully charged battery into the reservoir; assemble reservoir + pump until you feel side locks and hear a sound.
- Prime until a drop appears; attach pump to the base until a click; choose Fill Cannula only when the base was changed (otherwise Skip).
You’re done—the pump is secure, primed, and ready. Watch once, then repeat these steps with confidence.